250V 6.3A 10A UL VDE Green Fuse Base 5.2x20 PCB Fuse Holder PTF-76 Fuse Block with Cover
Product Description
| Item | PCB Mount PTF-76 Fuse Holder |
| Max Rating | 6.3A 10A 250V |
| Body Color | green |
| House material | PA |
| Terminal material | brass |
| Body Length | 24.4 mm |
| Body Wdth | 9.4 mm |
| Body Height | 10.5 mm |
| Pin Distance | 15 mm |
Fuse Block for 5 x 20mm Fuses
Electrical Characteristics:
Rating:6.3A 10A 250V
Operating Power:1.6W
Contact Resistance: <5mΩ
lnsulation Resistance: >100mΩ
Dielectric Strength: >3000Vac/60sec.
Material:
- lnsulation Body:PA UL 94V-0
- Terminal: nickel plated brass
This pcb mount fuse holders is compatible with 5x20mm glass and ceramic fuses for overcurrent protection in electronics equipment, appliances, and lighting circuits. They are used with glass fuses for protecting low-current circuits or ceramic fuses for protecting high-current circuits. They are easy to install on the printed circuit boards.
Drawing of the PTF-76 fuse holder
Please allow 1-3mm tolerance due to manual measurement.
KEY WORDS: FUSE HOLDER. PCB FUSE HOLDER, 5X20 FUSE HOLDER, FUSE BASE, PTF-76 FUSE BLOCK
5x20 glass fuses
5x20 ceramic fuses
In electronics and electrical engineering, a fuse is an electrical safety device that operates to provide overcurrent protection of an electrical circuit. Its essential component is a metal wire or strip that melts when too much current flows through it, thereby stopping or interrupting the current. It is a sacrificial device; once a fuse has operated it is an open circuit, and must be replaced or rewired, depending on its type.
Fuses have been used as essential safety devices from the early days of electrical engineering. Today there are thousands of different fuse designs which have specific current and voltage ratings, breaking capacity, and response times, depending on the application. The time and current operating characteristics of fuses are chosen to provide adequate protection without needless interruption. Wiring regulations usually define a maximum fuse current rating for particular circuits. Short circuits, overloading, mismatched loads, or device failure are the prime or some of the reasons for fuse operation. When a damaged live wire makes contact with a metal case that is connected to ground, a short circuit will form and the fuse will blow.
Shipping Term:
EXW, DDU, DDP, C&F, FOB
Shipping Methods:
Express, By Air, By Sea
Selection of the Fuse and Holder Solution
The first step is to answer the following questions:
- Will the fuse need to accessible for replacement?
- How often will the fuse need to be replaced?
- Should the end customer of the appliance have access to change the fuse?
- Should the fuse only be accessible from outside the appliance?
- How much is available to spend on safety and reliability?
Q: Are you trading company or manufacturer ?
A: We are a fuse product factory.
Q: How long is your delivery time?
A: Within 3 days if the goods are in stock, 5-10 days if the goods not in stock, according to the quantity.
Q: Do you provide samples ? is it free?
A: Yes, we could offer the samples for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: 100% in advance, T/T.
250V 6.3A Fuse Base 5.2x20 PCB Fuse Holder PTF-76 Fuse Block with Cover
250V 10A Fuse Base 5.2x20 PCB Fuse Holder PTF-76 Fuse Block with Cover
Product Tags:
|
|
1.6W 10A Green Fuse Holder PCB 5.2x20mm Fuse Block With Cover Images
|
